HOOK -N- PULL TIE DOWNS

Hook-N-Pull™ Tie Downs feature closed end "S" hooks made from high quality steel with heavy plating, and tie down bards are made from high grade aluminum, hardened for strength and ball burnished and anodized. Furnished with either 3/8" or 1/2" diameter nylon rope.   3/8" dia. are designed for Light aircraft, Home Builts, and Take-a-long. 1/2" dia. are designed for Heavy Singles and Light to Medium Twins.   Tie-down - Measured* lengths: Low wing & Tail Tie-downs max. reach: 54 inches. (3 ft. Measured) High wing Tie-downs max. reach of 108 inches. (7 ft. Measured)   Click here to view Secure & Release Illustration   All of the Tie-Downs are made with the highest quality 3 strand twisted nylon rope available. Nylon shows excellent resistance to abrasion, rot, mildew, petroleum products, and most chemicals. Nylon also has a slight elastic characteristic which resists shock loads that could otherwise damage aircraft.     *MEASURED Measure to the closest foot, the distance from the ground anchor to the planes point of attachment.  Use this foot mark to determine the tie-down length. HINT: Be sure to measure both sides, as the plane  may be closer to one anchor then the other. SHORTENING A TIE-DOWN Hook-N-Pull™ Tie-downs can be shortened by  pulling the tie-down bar away from the half knot and tying a third half knot close to the bars new position.

Size Description Part No. Price Buy 3/8" Rope HOOK-N-PULL TIE DOWN HI WING 13-00448 $13.85 3/8" Rope HOOK-N-PULL TIE DOWN LOW WING OR TAIL 13-00449 $12.50 1/2" Rope HOOK-N-PULL TIE DOWN HI WING 13-04962 $18.95 1/2" Rope HOOK-N-PULL TIE DOWN LOW WING OR TAIL 13-04961 $16.75