LIGHTWEIGHT HIGH TEMPERATURE

LIGHTWEIGHT HIGH TEMPERATURE SHIELDED IGNITION HARNESSES MFG. BY ACS PRODUCTS CO. New production ignition harnesses at remarkably low prices. Late type 5MM wire constructed of 16 strands of tightly braided copper wire impregnated with scuff resistant white silicone. All strands must fracture before a complete open circuit type failure occurs thus extending lead life. Lead flexibility is retained from -65° to 400°F. Moisture & cleaning solvent penetration is eliminated by the impregnated silicone coating. This extremely flexible wire lends itself to sharp bends thereby eliminating the need for old style harness elbows. No soldered joints in the grounding circuit. Custom made for most 4 & 6 cylinder engines using Bendix or Eisemann magnetos and 4 cylinder engines using Slick magnetos.Cable outlet plates are not furnished for Bendix & Eisemann mags as these are already installed on the magnetos in service. They must be purchased separately for new magneto installations. Harnesses for Slick magnetos are furnished with the backplates installed. Standard harnesses for the Bendix S4/S6 mags are fitted with a male nut which screws into the threaded outlet plate on the back of the mag. On some installations, the wires run through an unthreaded plate and attach directly to the mag terminals eliminating the use of the nut. If such a harness is required, send the old harness to us and it will be duplicated. Add $60.00 to price of harness for custom work required. Harnesses for old style Bendix SF4 and SF6 magnetos are fitted with female nuts. NOTE: Advise if leads install through unthreaded backplates. HARNESSES FOR BENDIX AND EISEMANN MAGNETOS Description Part Number Price Buy All 4-Cylinder Harnesses (8 wires) 12301-02 $132.95 All 6-Cylinder Harnesses (12 wires) (Not Available for Bendix S1200 Magnetos) 12305-10 $176.95 Replacement Leads to 48" (Specify Length) (Bendix & Eisemann only) Call for pricing HARNESSES FOR SLICK MAGNETOS Description Part Number Price Buy For 4000, 4200 & 4300 Series Mags (4 Cyl.) 12304-32 $168.95 All Harnesses Furnished with Cable Ties and Clamps FOR PLUGS WITH 5/8-24 BARREL SIZE ONLY BENDIX MAGNETOS ACS Products ignition harnesses can be used on experimental aircraft or on certified aircraft with field approval (FAA Form 337). If FAA/PMA harness is mandatory or if for use with 3/4" spark plugs, use Slick Bendix, Aero-Lite or Champion harnesses. Engine/Magneto Part No./ Price Engine/Magneto Part No./ Price Cont. A-65/S4 12301-02 $132.95 Cont. E-185/S6 12305 -10 $176.95 C-85/S4 12301-05 $125.95 E-225/S6 12305-11 $168.95 C-90/S4 12301-06 $125.95 O-470/S6 12305-13 $168.95 0-200/S4 12301-05 $125.95 C-145/S6 12305-09 $168.95 LYC. 0-100/S4 12301-21 $125.95 O-300/S6 12305-09 $168.95 0-235/S4 12301-21 $125.95 Lyc. 0-540/S6 12305-22 $168.95 0-290/S4 12301-21 $125.95 IO-540/S6 12305-22 $168.95 0-320/S4 12301-22 $125.95 Franklin165/S6 12305-41 $197.95 0-360/S4 12301-22 $125.95 Cont.C-125-SF6 12307-08 $168.95 Cont. A-65/SF4 12302-02 $125.95 Lyc.0-435/SF6 12307-23 $168.95 A-75/SF4 12302-03 $125.95 Lyc. 0-100/SF4 12302-20 $125.95 0-235/SF4 12302-20 $125.95 0-290/SF4 12302-20 $125.95 SLICK Magnetos EISEMANN Magnetos Engine/Magneto Part No./ Price Engine/Magneto Part No./ Price VW (M2266) 12304 -32 $168.95 Cont A65/LA-4 12303-04 $125.95 Lyc 0-235 (M2363) 12304-33 $168.95 A75/LA-4 12303-04 $125.95 0-290 (M2363) 12304-33 $168.95 C-85/LA-4 12303-07 $125.95 0-320,0-360 (M2363) 12304-33 $168.95 Cont. 0-200 (1780) 12304-31 $168.95 C-75 (1780) 12304-31 $168.95 C-85 (1780) 12304-31 $168.95 C-90 (1780) 12304-31 $168.95