PRIST HI-FLASH HI-FLO ANTI-ICING FUEL ADDITIVE

Trust The Original - Prist® brand anti-icing additive is the original and first product used for fuel anti-icing. No other competitive product has the history or length of trial experience in the field. Why take a chance? Insist on Prist® brand anti-icing additive. Prist® Hi-Flash® Hi-Flo™ Anti-Icing Fuel Additive: The Original Just Got Better Prist® Hi-Flash® Hi-Flo™ aerosol cans are now available with a redesigned trigger dispensing system that makes them easier and safer to use. The safety trigger gives the user control of additive flow with instant on and off dispensing. Now the trigger dispensing system comes pre-mounted on the can which eliminates leaks at the valve connection. This means less waste, no drips and no spills. Prist® anti-icing fuel additive comes in a wide range of packaging, making it easy to choose the amount of product and dispensing method for your application. The sizes include: 55-gallon drums, 5-gallon pails, 20-once and 8-ounce aerosol cans. The additive pilots ask for by name. 20oz Can PN 09-39555 $11.50 Case (24 Cans) PN 09-39554 $272.95 Hi-Flash Hi-Flo™ vs. Hi-Flash Lo-Flo™ What's the Difference? The two products are identical in chemical formula. Hi-Flo additive simply means the can delivers the product at a rate compatible with a 40 to 55 gall per minute fuel nozzle rate. Lo-Flo additive can deliver the product at a rate which is typical of avgas, which is 15 to 20 gallons per minute. Lo-Flo is also used in helicopters, which typically have to be fueled slowly. PRIST Anti-Icing Aviation Fuel Additive is approved for addition to turbine fuels under ASTM specification D1655 and for avgas under specification D910. The additive itself is exactly the same for both types of fuels and is produced to ASTM specification D4171 and to the Military Specification MIL-DTL-85470B. Does PRIST Anti-Icing Aviation Fuel Additive have a shelf life? As long as it is stored correctly, PRIST Anti-Icing Fuel Additive has no shelf life. It is important to keep it as dry as possible and that the container remains sealed to avoid contact with water or moist air. The additive has a natural tendency to seek out water, and the effectiveness will be greatly reduced if it comes in contact with water in any way while in storage. If the container rusts or is punctured, it can compromise the quality of the product and should not be used unless analyzed for chemical content. 8oz Can PN 09-02048 $7.35 Case (24 Cans) PN 09-02048-1 $147.00 Prist® Acrylic, Plastic and Glass Cleaner: For All Type of Windows The convenient 13-ounce can is ideal for use on acrylic, stretched acrylic, poly carbonate, glass, and coated glass. It may also be used for cleaning many other sources including aircraft interiors, goggles, helmets, lenses, and plastic and metal surfaces. Prist® cleaner contains no abrasive cleaning agents and cleans without scratching glass or plastic surfaces. This prevents scratches in acrylic windshields that necessitate costly replacement. Unlike other cleaners, Prist® cleaner dispenses as foam and leaves no residue. The cleaning agent soaks into the dirt, grease and insects to remove them with minimum effort. Suitable for interior and exterior cleaning, Prist® cleaner prevents static charge build-up with regular use. 13oz Can PN 09-02049 $6.95 Case (12 Cans) PN 09-02049-1 $73.50