The two dimmers include a single channel model. Both use pulse wave modulation, or PWM electronic design for precise control of LED lighting such as LED instrument panel lighting, baggage, utility, map or post lights. The self-contained products are designed for easy installation and feature integrated on/off switches on each rheostat.
Rated at 18 Watts per dimmer channel, the dimmers are capable of operating a large number of interior lighting products and are engineered to provide additional over-current, over-voltage and reverse polarity protection.
Click here to download the Installation Instruction in PDF.
PN 11-06674
Single Channel Pilot's Light Dimmer
Single Channel Dimmer is ideal for LED Light Strips, General Panel Lighting or Series of Lights (such as map or baggage lights). The rotating control has its own on/off switch.
1.5A (18W) 12V dimmer using PWM (pulse wave modulation) for precise control
Integrated on/off switch and smooth action rotating control
Just 1.75" x 1.75" inches square. 1/4" shaft with high quality knob
Screw down terminals for input and output wiring. Very easy to install.
Powerful enough to operate numerous panel lights and convenience lights
To install, drill 1/4" hole, wire input and output to screw terminals and install.
PN 11-06675
2-Channel Pilot's Light Dimmer Dual Channel (2 channel) Dimmers can be used with any combination of lighting - Dual Color LED Light Strips or for controlling 2 different sets of lights. Each channel has its own ON/OFF switch and dimmer control.
Each channel controls 1.5A (18W) using pulse-wave modulation for precise control
Controls LED or incandescent lighting, up to 18W each channel
Dual integrated on/off switches and smooth action rotating control
Permits complete independent operation of each channel (on/off & dimming)
Just 2.5" x 1.75" inches square. Dual 1/4" shafts with push-on knobs
Screw down terminals for input and output wiring. Very easy to install.
Powerful enough to operate numerous panel lights and convenience lights
Specifications
Mode of Operation: Continuously variable, pulse width modulation (PWM)
Supply Voltage: 8 to 20 VDC working voltage, up to 30VDC momentary. Dimmer must be fused at power source
Output Voltage Range: From zero VDC to supply voltage
Output Current Range: Up 1.5A
Max Continuous Output Current: Full rated current up to 105F (40C), 75% of rated current up to 115F (46C)
Ambient Temp Range: Minus 40F (-40C) to 115F (46C), with restriction as noted
Size: About 1-3/4" inch square
Weight: 30 to 40 gm, depending on wired connection type
Heat Sink: Electrically isolated from voltage and acts as a circuit enclosure. Max. temperature rise under load is about 40 F (22C) above ambient.
Electrical - Dimming Systems
