Two Place Trim Mixer

The 2 Place Trim Mixer is a solid-state SMT equipment designed to replace the traditional mechanical relays earlier used for two pilots to operate the aircraft's trim system while adding the advantages of logic functions found in electronic equipment. The mixer incorporates MOSFET (Metal Oxide Silicon Field Effect Transistor) transistors for switching the high current with no moving parts and no electrical arc to prevent fuel fumes ignition. A typical Trim System is composed of the following elements: A mixer unit, the 2 Place Trim Mixer, and Two DC trim motors (such as the MAC Servo with or w/o connections to position indicator) Harnesses An SPST switch (option) which are not included & should be provided by the customer A key feature of the 2 Place Trim Mixer is the prevention of a conflict between two opposite inputs (eg. "UP" by the pilot, and "DOWN" by the copilot). Once an input is established by one of the crew, another input is ignored. An additional switch (option) enables the pilot to "Disable" the copilot from inputting any command to the trim motors. The 2 Place Trim Mixer is enclosed in an aluminum enclosure for EMI/RFI protection and for easy installation onto the aircraft.

Specifications

No. of Operators: 2 Operating Voltage: 10VDC to 16VDC Max Current: 7A Quiescent Current: Less than 4mA Current Through any Switch Contact: Less than 10µA Operating Temperature: -20ºC to +85ºC

Description Part No. Price Buy TRIM MIXER - TWO PLACE 11-02876 $193.00